王宏晓，女，1988 年，博士生导师，副教授，工学博士。主要研究方向：碳纤维复合材料结构设计与制造、增材制造、碳纤维复合材料3D打印，数字化设计与制造。

邮箱：zzwhx2019@haut.edu.cn

教育及工作经历：

202403- 至今，河南工业大学，机电工程学院，副教授

202107- 202403，卫华集团，卫华集团博士后科研工作站，博士后

201903- 202403，河南工业大学，机电工程学院，讲师

201309-201903 ，西安交通大学，机械工程学院，工学博士

代表性科研项目：

Ø 复合材料长桁墙梁预制体自动化辊压成型机理及其工艺研究  2023-1至2025-12，99万元，主持

Ø 热塑性碳纤维单向预浸带热压成型变形机理及其控制工艺研究，河南省科技攻关项目，10万元，2023-1至2024-12，主持

Ø 工业机器人智能运行数字孪生系统开发 2023-8至2024-8，30万元，主持

Ø 基于数字孪生的起重机金属结构全寿命智能维护研究 河南省博士后科研启动项目 2021-11 至2023-12， 10 万元，主持

Ø 河南省教育厅， GFRP 汽车板簧的强韧仿生设计及增材制造工艺研究，河南省教育厅自然科学项目， 20A460001 ， 2020-01 至 2022-12， 5 万元，主持

代表性论文：

Ø Wang Hongxiao; Song Zihao; Zhu Dengjie; Wang Qilong; Zan Xiaojiang; Lei Baqian; Niu Hongbin; Preparation of Continuous Carbon-Fiber/Polycarbonate Prepreg Filaments With Low Damage Based on a Synergistic Suspension Pre-Impregnation and Melt-Impregnation Process, Polymer Composites, 2026

Ø Wang Hongxiao; Ding Peng; Ren Mengshuai; Zhang Di; Zhang Jianmin; Research on the Feasibility and Interfacial Investigation of Self-Resistance Heating Technology in CarbonFiber/PMMA Composites, Polymer Composites, 2026

Ø Yanlei Chen, Dengjie Zhu, Yanbo Hui, Hongxiao Wang* et al.,“Preparation and Multi-Scale Characterization of Continuous Carbon Fiber/Polyether Ether Ketone Prepreg Filaments for Fused Deposition Modeling 3D Printing: Influence of Processing Parameters on Performance and Microstructure,”Engineered Science (2026)

Ø Wang Qilong; Wang Hongxiao*; Zhu Dengjie; Li Hongchen; Niu Hongbin; Zhang Jiangtao; A Novel Suspension for Rapid, Continuous PEEK Impregnation of Sized Large‐Tow Carbon Fibers, Polymer Composites, 2025

Ø Xiao Wen; Hui Yanbo; Wang Hongxiao*; Zhang Xiaohui; Zhang Yi; Tang Yongkai; Niu Hongbin; Surface Flattening Approach for Forming Variable‐Curvature CFRP Stringers, Polymer Composites, 2025

Ø Ding Peng, Hui Yanbo, Wang Hongxiao*,et al.Investigation of the manufacturing process for PMMA/carbon fiber prepreg[J].Polymer Composites, 2025, 46(13).

Ø Wang Hongxiao; Zhang Yi; Xiao Wen; Zhang Xiaohui; Wu Yanghang; Zhu Dengjie; Study on Roll Forming Process of Carbon Fiber Composite L-shaped Stringer, Applied Composite Materials, 2025, 32(2025)

Ø Wang Hongxiao, Yahang Wu, Yi Zhang, and Xiaohui Zhang. "Influence of the Temperature-Dependent Characteristics of CFRP Mechanical Properties on the Critical Axial Force of Drilling Delamination" Polymers, 2023 , 15(3): 680. 2023

Ø Wang Hongxiao, Bai Luyao, Hui Yanbo, "Hemispherical Molding Experiment and Simulation of Unidirectional Carbon Fiber Prepreg", International Journal of Polymer Science, vol. 2022, Article ID 1196567, 13 pages, 2022.

Ø 白路遥 , 王宏晓 *, 禹军安 , 陈艳雷 , 惠延波 . 基于结构仿生的 GFRP 板簧层间增韧性能研究[J/OL]. 复合材料科学与工程: 1-6[2022-02-18].

Ø Wang Hongxiao; Zhang Xiaohui; Duan Yugang ; Investigating the Effect of Low-Temperature Drilling Process on the Mechanical Behavior of CFRP, Polymers, 2022, 14(5): 1034

Ø Wang Hongxiao, Zhang Xiaohui, Duan Yugang. Effects of drilling area temperature on drilling of carbon fiber reinforced polymer composites due to temperature-dependent properties[J]. Int. J. Adv. Manuf. Technol., 2018,96(5-8):2943-2951.

Ø Wang Hongxiao, Zhang Xiaohui, Duan Yugang. Experimental and Numerical Study of the Interfacial Shear Strength in Carbon Fiber/Epoxy Resin Composite under  Thermal Loads[J]. Int. J. Polym. Sci., 2018, 2018:1-8.

Ø Wang HongXiao, Duan YuGang, ABULIZI. Design Optimization of CFRP Stacking Sequence Using a Multi-Island Genetic Algorithms Under Low-velocity Impact Loads[J]. J. Wuhan Univ. Technol.-Mat. Sci., 2017, 32(3):720-725.